huayunpeng
/
StuMgmSys
1
0
Atdalīts 0
Kods Problēmas 0 Izmaiņu pieprasījumi 0 Laidieni 0 Vikivietne Aktivitāte
Pārlūkot izejas kodu

delegate委托未完全实现，暂存

Server
Somuns pirms 4 gadiem
vecāks
812be4c911
revīzija
1250558846
17 mainītis faili ar 1283 papildinājumiem un 0 dzēšanām
Dalītais skats
Salīdzināšanas iespējas
Rādīt statistiku Lejupielādēt ielāpa failu Lejupielādēt izmaiņu failu
  1. +63
    -0
      .gitattributes
  2. +189
    -0
      .gitignore
  3. +44
    -0
      MgmSys/MgmSys.sln
  4. +22
    -0
      StuMgmServer/StuMgmServer.sln
  5. +20
    -0
      StuMgmServer/StuMgmServer/Program.cs
  6. +36
    -0
      StuMgmServer/StuMgmServer/Properties/AssemblyInfo.cs
  7. +63
    -0
      StuMgmServer/StuMgmServer/Properties/Resources.Designer.cs
  8. +117
    -0
      StuMgmServer/StuMgmServer/Properties/Resources.resx
  9. +26
    -0
      StuMgmServer/StuMgmServer/Properties/Settings.Designer.cs
  10. +7
    -0
      StuMgmServer/StuMgmServer/Properties/Settings.settings
  11. +191
    -0
      StuMgmServer/StuMgmServer/Server.Designer.cs
  12. +67
    -0
      StuMgmServer/StuMgmServer/Server.cs
  13. +126
    -0
      StuMgmServer/StuMgmServer/Server.resx
  14. +121
    -0
      StuMgmServer/StuMgmServer/StuMgmSer.cs
  15. +86
    -0
      StuMgmServer/StuMgmServer/StuMgmServer.csproj
  16. +102
    -0
      StuMgmServer/StuMgmServer/TcpConn.cs
  17. +3
    -0
      StuMgmServer/StuMgmServer/app.config

+ 63
- 0
.gitattributes Parādīt failu

@@ -0,0 +1,63 @@
###############################################################################
# Set default behavior to automatically normalize line endings.
###############################################################################
* text=auto

###############################################################################
# Set default behavior for command prompt diff.
#
# This is need for earlier builds of msysgit that does not have it on by
# default for csharp files.
# Note: This is only used by command line
###############################################################################
#*.cs diff=csharp

###############################################################################
# Set the merge driver for project and solution files
#
# Merging from the command prompt will add diff markers to the files if there
# are conflicts (Merging from VS is not affected by the settings below, in VS
# the diff markers are never inserted). Diff markers may cause the following
# file extensions to fail to load in VS. An alternative would be to treat
# these files as binary and thus will always conflict and require user
# intervention with every merge. To do so, just uncomment the entries below
###############################################################################
#*.sln merge=binary
#*.csproj merge=binary
#*.vbproj merge=binary
#*.vcxproj merge=binary
#*.vcproj merge=binary
#*.dbproj merge=binary
#*.fsproj merge=binary
#*.lsproj merge=binary
#*.wixproj merge=binary
#*.modelproj merge=binary
#*.sqlproj merge=binary
#*.wwaproj merge=binary

###############################################################################
# behavior for image files
#
# image files are treated as binary by default.
###############################################################################
#*.jpg binary
#*.png binary
#*.gif binary

###############################################################################
# diff behavior for common document formats
#
# Convert binary document formats to text before diffing them. This feature
# is only available from the command line. Turn it on by uncommenting the
# entries below.
###############################################################################
#*.doc diff=astextplain
#*.DOC diff=astextplain
#*.docx diff=astextplain
#*.DOCX diff=astextplain
#*.dot diff=astextplain
#*.DOT diff=astextplain
#*.pdf diff=astextplain
#*.PDF diff=astextplain
#*.rtf diff=astextplain
#*.RTF diff=astextplain

+ 189
- 0
.gitignore Parādīt failu

@@ -0,0 +1,189 @@
## Ignore Visual Studio temporary files, build results, and
## files generated by popular Visual Studio add-ons.

# User-specific files
*.suo
*.user
*.sln.docstates

# Build results
[Dd]ebug/
[Dd]ebugPublic/
[Rr]elease/
x64/
build/
bld/
[Bb]in/
[Oo]bj/

# Roslyn cache directories
*.ide/

# MSTest test Results
[Tt]est[Rr]esult*/
[Bb]uild[Ll]og.*

#NUNIT
*.VisualState.xml
TestResult.xml

# Build Results of an ATL Project
[Dd]ebugPS/
[Rr]eleasePS/
dlldata.c

*_i.c
*_p.c
*_i.h
*.ilk
*.meta
*.obj
*.pch
*.pdb
*.pgc
*.pgd
*.rsp
*.sbr
*.tlb
*.tli
*.tlh
*.tmp
*.tmp_proj
*.log
*.vspscc
*.vssscc
.builds
*.pidb
*.svclog
*.scc

# Chutzpah Test files
_Chutzpah*

# Visual C++ cache files
ipch/
*.aps
*.ncb
*.opensdf
*.sdf
*.cachefile

# Visual Studio profiler
*.psess
*.vsp
*.vspx

# TFS 2012 Local Workspace
$tf/

# Guidance Automation Toolkit
*.gpState

# ReSharper is a .NET coding add-in
_ReSharper*/
*.[Rr]e[Ss]harper
*.DotSettings.user

# JustCode is a .NET coding addin-in
.JustCode

# TeamCity is a build add-in
_TeamCity*

# DotCover is a Code Coverage Tool
*.dotCover

# NCrunch
_NCrunch_*
.*crunch*.local.xml

# MightyMoose
*.mm.*
AutoTest.Net/

# Web workbench (sass)
.sass-cache/

# Installshield output folder
[Ee]xpress/

# DocProject is a documentation generator add-in
DocProject/buildhelp/
DocProject/Help/*.HxT
DocProject/Help/*.HxC
DocProject/Help/*.hhc
DocProject/Help/*.hhk
DocProject/Help/*.hhp
DocProject/Help/Html2
DocProject/Help/html

# Click-Once directory
publish/

# Publish Web Output
*.[Pp]ublish.xml
*.azurePubxml
## TODO: Comment the next line if you want to checkin your
## web deploy settings but do note that will include unencrypted
## passwords
#*.pubxml

# NuGet Packages Directory
packages/*
## TODO: If the tool you use requires repositories.config
## uncomment the next line
#!packages/repositories.config

# Enable "build/" folder in the NuGet Packages folder since
# NuGet packages use it for MSBuild targets.
# This line needs to be after the ignore of the build folder
# (and the packages folder if the line above has been uncommented)
!packages/build/

# Windows Azure Build Output
csx/
*.build.csdef

# Windows Store app package directory
AppPackages/

# Others
sql/
*.Cache
ClientBin/
[Ss]tyle[Cc]op.*
~$*
*~
*.dbmdl
*.dbproj.schemaview
*.pfx
*.publishsettings
node_modules/

# RIA/Silverlight projects
Generated_Code/

# Backup & report files from converting an old project file
# to a newer Visual Studio version. Backup files are not needed,
# because we have git ;-)
_UpgradeReport_Files/
Backup*/
UpgradeLog*.XML
UpgradeLog*.htm

# SQL Server files
*.mdf
*.ldf

# Business Intelligence projects
*.rdl.data
*.bim.layout
*.bim_*.settings

# Microsoft Fakes
FakesAssemblies/

# LightSwitch generated files
GeneratedArtifacts/
_Pvt_Extensions/
ModelManifest.xml

+ 44
- 0
MgmSys/MgmSys.sln Parādīt failu

@@ -0,0 +1,44 @@

Microsoft Visual Studio Solution File, Format Version 12.00
# Visual Studio 2013
VisualStudioVersion = 12.0.40629.0
MinimumVisualStudioVersion = 10.0.40219.1
Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "MgmSysApp", "MgmSysApp\MgmSysApp.csproj", "{8924FC9E-8A06-4971-A717-20B5371C3F9C}"
EndProject
Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "MyStuMgmSysLib", "MyStuMgmSysLib\MyStuMgmSysLib.csproj", "{3AA339B4-AD71-4674-8BBE-FDD69F963AE8}"
EndProject
Global
GlobalSection(SolutionConfigurationPlatforms) = preSolution
Debug|Any CPU = Debug|Any CPU
Debug|Mixed Platforms = Debug|Mixed Platforms
Debug|Win32 = Debug|Win32
Release|Any CPU = Release|Any CPU
Release|Mixed Platforms = Release|Mixed Platforms
Release|Win32 = Release|Win32
EndGlobalSection
GlobalSection(ProjectConfigurationPlatforms) = postSolution
{8924FC9E-8A06-4971-A717-20B5371C3F9C}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
{8924FC9E-8A06-4971-A717-20B5371C3F9C}.Debug|Any CPU.Build.0 = Debug|Any CPU
{8924FC9E-8A06-4971-A717-20B5371C3F9C}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
{8924FC9E-8A06-4971-A717-20B5371C3F9C}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
{8924FC9E-8A06-4971-A717-20B5371C3F9C}.Debug|Win32.ActiveCfg = Debug|Any CPU
{8924FC9E-8A06-4971-A717-20B5371C3F9C}.Release|Any CPU.ActiveCfg = Release|Any CPU
{8924FC9E-8A06-4971-A717-20B5371C3F9C}.Release|Any CPU.Build.0 = Release|Any CPU
{8924FC9E-8A06-4971-A717-20B5371C3F9C}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
{8924FC9E-8A06-4971-A717-20B5371C3F9C}.Release|Mixed Platforms.Build.0 = Release|Any CPU
{8924FC9E-8A06-4971-A717-20B5371C3F9C}.Release|Win32.ActiveCfg = Release|Any CPU
{3AA339B4-AD71-4674-8BBE-FDD69F963AE8}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
{3AA339B4-AD71-4674-8BBE-FDD69F963AE8}.Debug|Any CPU.Build.0 = Debug|Any CPU
{3AA339B4-AD71-4674-8BBE-FDD69F963AE8}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
{3AA339B4-AD71-4674-8BBE-FDD69F963AE8}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
{3AA339B4-AD71-4674-8BBE-FDD69F963AE8}.Debug|Win32.ActiveCfg = Debug|Any CPU
{3AA339B4-AD71-4674-8BBE-FDD69F963AE8}.Release|Any CPU.ActiveCfg = Release|Any CPU
{3AA339B4-AD71-4674-8BBE-FDD69F963AE8}.Release|Any CPU.Build.0 = Release|Any CPU
{3AA339B4-AD71-4674-8BBE-FDD69F963AE8}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
{3AA339B4-AD71-4674-8BBE-FDD69F963AE8}.Release|Mixed Platforms.Build.0 = Release|Any CPU
{3AA339B4-AD71-4674-8BBE-FDD69F963AE8}.Release|Win32.ActiveCfg = Release|Any CPU
EndGlobalSection
GlobalSection(SolutionProperties) = preSolution
HideSolutionNode = FALSE
EndGlobalSection
EndGlobal

+ 22
- 0
StuMgmServer/StuMgmServer.sln Parādīt failu

@@ -0,0 +1,22 @@

Microsoft Visual Studio Solution File, Format Version 12.00
# Visual Studio 2013
VisualStudioVersion = 12.0.40629.0
MinimumVisualStudioVersion = 10.0.40219.1
Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "StuMgmServer", "StuMgmServer\StuMgmServer.csproj", "{8FAF69C1-FEBA-49F5-A247-8FF7A5798673}"
EndProject
Global
GlobalSection(SolutionConfigurationPlatforms) = preSolution
Debug|Any CPU = Debug|Any CPU
Release|Any CPU = Release|Any CPU
EndGlobalSection
GlobalSection(ProjectConfigurationPlatforms) = postSolution
{8FAF69C1-FEBA-49F5-A247-8FF7A5798673}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
{8FAF69C1-FEBA-49F5-A247-8FF7A5798673}.Debug|Any CPU.Build.0 = Debug|Any CPU
{8FAF69C1-FEBA-49F5-A247-8FF7A5798673}.Release|Any CPU.ActiveCfg = Release|Any CPU
{8FAF69C1-FEBA-49F5-A247-8FF7A5798673}.Release|Any CPU.Build.0 = Release|Any CPU
EndGlobalSection
GlobalSection(SolutionProperties) = preSolution
HideSolutionNode = FALSE
EndGlobalSection
EndGlobal

+ 20
- 0
StuMgmServer/StuMgmServer/Program.cs Parādīt failu

@@ -0,0 +1,20 @@
using System;
using System.Collections.Generic;
using System.Windows.Forms;

namespace StuMgmServer
{
static class Program
{
/// <summary>
/// 应用程序的主入口点。
/// </summary>
[STAThread]
static void Main()
{
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Server());
}
}
}

+ 36
- 0
StuMgmServer/StuMgmServer/Properties/AssemblyInfo.cs Parādīt failu

@@ -0,0 +1,36 @@
using System.Reflection;
using System.Runtime.CompilerServices;
using System.Runtime.InteropServices;

// 有关程序集的常规信息通过以下
// 特性集控制。更改这些特性值可修改
// 与程序集关联的信息。
[assembly: AssemblyTitle("StuMgmServer")]
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("")]
[assembly: AssemblyProduct("StuMgmServer")]
[assembly: AssemblyCopyright("Copyright © 2021")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]

// 将 ComVisible 设置为 false 使此程序集中的类型
// 对 COM 组件不可见。 如果需要从 COM 访问此程序集中的类型，
// 则将该类型上的 ComVisible 特性设置为 true。
[assembly: ComVisible(false)]

// 如果此项目向 COM 公开，则下列 GUID 用于类型库的 ID
[assembly: Guid("cbf3a81f-7eff-4135-9b1f-63410d9b3a96")]

// 程序集的版本信息由下面四个值组成:
//
// 主版本
// 次版本
// 生成号
// 修订号
//
// 可以指定所有这些值，也可以使用“生成号”和“修订号”的默认值，
// 方法是按如下所示使用“*”:
// [assembly: AssemblyVersion("1.0.*")]
[assembly: AssemblyVersion("1.0.0.0")]
[assembly: AssemblyFileVersion("1.0.0.0")]

+ 63
- 0
StuMgmServer/StuMgmServer/Properties/Resources.Designer.cs Parādīt failu

@@ -0,0 +1,63 @@
//------------------------------------------------------------------------------
// <auto-generated>
// 此代码由工具生成。
// 运行时版本:4.0.30319.42000
//
// 对此文件的更改可能会导致不正确的行为，并且如果
// 重新生成代码，这些更改将会丢失。
// </auto-generated>
//------------------------------------------------------------------------------

namespace StuMgmServer.Properties {
using System;
/// <summary>
/// 一个强类型的资源类，用于查找本地化的字符串等。
/// </summary>
// 此类是由 StronglyTypedResourceBuilder
// 类通过类似于 ResGen 或 Visual Studio 的工具自动生成的。
// 若要添加或移除成员，请编辑 .ResX 文件，然后重新运行 ResGen
// (以 /str 作为命令选项)，或重新生成 VS 项目。
[global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")]
[global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
[global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
internal class Resources {
private static global::System.Resources.ResourceManager resourceMan;
private static global::System.Globalization.CultureInfo resourceCulture;
[global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
internal Resources() {
}
/// <summary>
/// 返回此类使用的缓存的 ResourceManager 实例。
/// </summary>
[global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
internal static global::System.Resources.ResourceManager ResourceManager {
get {
if (object.ReferenceEquals(resourceMan, null)) {
global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("StuMgmServer.Properties.Resources", typeof(Resources).Assembly);
resourceMan = temp;
}
return resourceMan;
}
}
/// <summary>
/// 使用此强类型资源类，为所有资源查找
/// 重写当前线程的 CurrentUICulture 属性。
/// </summary>
[global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
internal static global::System.Globalization.CultureInfo Culture {
get {
return resourceCulture;
}
set {
resourceCulture = value;
}
}
}
}

+ 117
- 0
StuMgmServer/StuMgmServer/Properties/Resources.resx Parādīt failu

@@ -0,0 +1,117 @@
<?xml version="1.0" encoding="utf-8"?>
<root>
<!--
Microsoft ResX Schema
Version 2.0
The primary goals of this format is to allow a simple XML format
that is mostly human readable. The generation and parsing of the
various data types are done through the TypeConverter classes
associated with the data types.
Example:
... ado.net/XML headers & schema ...
<resheader name="resmimetype">text/microsoft-resx</resheader>
<resheader name="version">2.0</resheader>
<resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
<resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
<data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
<data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
<data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
<value>[base64 mime encoded serialized .NET Framework object]</value>
</data>
<data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
<value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
<comment>This is a comment</comment>
</data>
There are any number of "resheader" rows that contain simple
name/value pairs.
Each data row contains a name, and value. The row also contains a
type or mimetype. Type corresponds to a .NET class that support
text/value conversion through the TypeConverter architecture.
Classes that don't support this are serialized and stored with the
mimetype set.
The mimetype is used for serialized objects, and tells the
ResXResourceReader how to depersist the object. This is currently not
extensible. For a given mimetype the value must be set accordingly:
Note - application/x-microsoft.net.object.binary.base64 is the format
that the ResXResourceWriter will generate, however the reader can
read any of the formats listed below.
mimetype: application/x-microsoft.net.object.binary.base64
value : The object must be serialized with
: System.Serialization.Formatters.Binary.BinaryFormatter
: and then encoded with base64 encoding.
mimetype: application/x-microsoft.net.object.soap.base64
value : The object must be serialized with
: System.Runtime.Serialization.Formatters.Soap.SoapFormatter
: and then encoded with base64 encoding.

mimetype: application/x-microsoft.net.object.bytearray.base64
value : The object must be serialized into a byte array
: using a System.ComponentModel.TypeConverter
: and then encoded with base64 encoding.
-->
<xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xsd:element name="root" msdata:IsDataSet="true">
<xsd:complexType>
<xsd:choice maxOccurs="unbounded">
<xsd:element name="metadata">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string" minOccurs="0" />
</xsd:sequence>
<xsd:attribute name="name" type="xsd:string" />
<xsd:attribute name="type" type="xsd:string" />
<xsd:attribute name="mimetype" type="xsd:string" />
</xsd:complexType>
</xsd:element>
<xsd:element name="assembly">
<xsd:complexType>
<xsd:attribute name="alias" type="xsd:string" />
<xsd:attribute name="name" type="xsd:string" />
</xsd:complexType>
</xsd:element>
<xsd:element name="data">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
<xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
</xsd:sequence>
<xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
<xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
<xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
</xsd:complexType>
</xsd:element>
<xsd:element name="resheader">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
</xsd:sequence>
<xsd:attribute name="name" type="xsd:string" use="required" />
</xsd:complexType>
</xsd:element>
</xsd:choice>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<resheader name="resmimetype">
<value>text/microsoft-resx</value>
</resheader>
<resheader name="version">
<value>2.0</value>
</resheader>
<resheader name="reader">
<value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
</resheader>
<resheader name="writer">
<value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
</resheader>
</root>

+ 26
- 0
StuMgmServer/StuMgmServer/Properties/Settings.Designer.cs Parādīt failu

@@ -0,0 +1,26 @@
//------------------------------------------------------------------------------
// <auto-generated>
// 此代码由工具生成。
// 运行时版本:4.0.30319.42000
//
// 对此文件的更改可能会导致不正确的行为，并且如果
// 重新生成代码，这些更改将会丢失。
// </auto-generated>
//------------------------------------------------------------------------------

namespace StuMgmServer.Properties {
[global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
[global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "12.0.0.0")]
internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
public static Settings Default {
get {
return defaultInstance;
}
}
}
}

+ 7
- 0
StuMgmServer/StuMgmServer/Properties/Settings.settings Parādīt failu

@@ -0,0 +1,7 @@
<?xml version='1.0' encoding='utf-8'?>
<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
<Profiles>
<Profile Name="(Default)" />
</Profiles>
<Settings />
</SettingsFile>

+ 191
- 0
StuMgmServer/StuMgmServer/Server.Designer.cs Parādīt failu

@@ -0,0 +1,191 @@
namespace StuMgmServer
{
partial class Server
{
/// <summary>
/// 必需的设计器变量。
/// </summary>
private System.ComponentModel.IContainer components = null;

/// <summary>
/// 清理所有正在使用的资源。
/// </summary>
/// <param name="disposing">如果应释放托管资源，为 true；否则为 false。</param>
protected override void Dispose(bool disposing)
{
if (disposing && (components != null))
{
components.Dispose();
}
base.Dispose(disposing);
}

#region Windows 窗体设计器生成的代码

/// <summary>
/// 设计器支持所需的方法 - 不要
/// 使用代码编辑器修改此方法的内容。
/// </summary>
private void InitializeComponent()
{
this.components = new System.ComponentModel.Container();
this.tlpAll = new System.Windows.Forms.TableLayoutPanel();
this.tableLayoutPanel1 = new System.Windows.Forms.TableLayoutPanel();
this.txtPort = new System.Windows.Forms.TextBox();
this.lblSwiSta = new System.Windows.Forms.Label();
this.btnSerSwitch = new System.Windows.Forms.Button();
this.lblPort = new System.Windows.Forms.Label();
this.button1 = new System.Windows.Forms.Button();
this.richTextBox1 = new System.Windows.Forms.RichTextBox();
this.menuStrip1 = new System.Windows.Forms.MenuStrip();
this.tmr = new System.Windows.Forms.Timer(this.components);
this.tlpAll.SuspendLayout();
this.tableLayoutPanel1.SuspendLayout();
this.SuspendLayout();
//
// tlpAll
//
this.tlpAll.ColumnCount = 4;
this.tlpAll.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 25F));
this.tlpAll.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 25F));
this.tlpAll.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 25F));
this.tlpAll.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 25F));
this.tlpAll.Controls.Add(this.tableLayoutPanel1, 0, 0);
this.tlpAll.Controls.Add(this.button1, 1, 0);
this.tlpAll.Controls.Add(this.richTextBox1, 2, 0);
this.tlpAll.Dock = System.Windows.Forms.DockStyle.Fill;
this.tlpAll.Location = new System.Drawing.Point(0, 24);
this.tlpAll.Name = "tlpAll";
this.tlpAll.RowCount = 2;
this.tlpAll.RowStyles.Add(new System.Windows.Forms.RowStyle(System.Windows.Forms.SizeType.Percent, 50F));
this.tlpAll.RowStyles.Add(new System.Windows.Forms.RowStyle(System.Windows.Forms.SizeType.Percent, 50F));
this.tlpAll.Size = new System.Drawing.Size(1114, 486);
this.tlpAll.TabIndex = 0;
//
// tableLayoutPanel1
//
this.tableLayoutPanel1.ColumnCount = 2;
this.tableLayoutPanel1.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 50F));
this.tableLayoutPanel1.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 50F));
this.tableLayoutPanel1.Controls.Add(this.txtPort, 1, 0);
this.tableLayoutPanel1.Controls.Add(this.lblSwiSta, 0, 1);
this.tableLayoutPanel1.Controls.Add(this.btnSerSwitch, 1, 1);
this.tableLayoutPanel1.Controls.Add(this.lblPort, 0, 0);
this.tableLayoutPanel1.Dock = System.Windows.Forms.DockStyle.Top;
this.tableLayoutPanel1.Location = new System.Drawing.Point(3, 3);
this.tableLayoutPanel1.Name = "tableLayoutPanel1";
this.tableLayoutPanel1.RowCount = 2;
this.tableLayoutPanel1.RowStyles.Add(new System.Windows.Forms.RowStyle(System.Windows.Forms.SizeType.Percent, 50F));
this.tableLayoutPanel1.RowStyles.Add(new System.Windows.Forms.RowStyle(System.Windows.Forms.SizeType.Percent, 50F));
this.tableLayoutPanel1.Size = new System.Drawing.Size(272, 100);
this.tableLayoutPanel1.TabIndex = 0;
//
// txtPort
//
this.txtPort.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Left | System.Windows.Forms.AnchorStyles.Right)));
this.txtPort.Font = new System.Drawing.Font("Calibri", 10.8F);
this.txtPort.Location = new System.Drawing.Point(139, 10);
this.txtPort.Name = "txtPort";
this.txtPort.Size = new System.Drawing.Size(130, 29);
this.txtPort.TabIndex = 3;
this.txtPort.Text = "502";
this.txtPort.TextAlign = System.Windows.Forms.HorizontalAlignment.Right;
//
// lblSwiSta
//
this.lblSwiSta.Anchor = System.Windows.Forms.AnchorStyles.None;
this.lblSwiSta.AutoSize = true;
this.lblSwiSta.Font = new System.Drawing.Font("Calibri", 10.8F);
this.lblSwiSta.Location = new System.Drawing.Point(13, 63);
this.lblSwiSta.Name = "lblSwiSta";
this.lblSwiSta.Size = new System.Drawing.Size(110, 23);
this.lblSwiSta.TabIndex = 1;
this.lblSwiSta.Text = "服务器状态";
//
// btnSerSwitch
//
this.btnSerSwitch.Dock = System.Windows.Forms.DockStyle.Fill;
this.btnSerSwitch.Font = new System.Drawing.Font("Calibri", 10.8F);
this.btnSerSwitch.Location = new System.Drawing.Point(139, 53);
this.btnSerSwitch.Name = "btnSerSwitch";
this.btnSerSwitch.Size = new System.Drawing.Size(130, 44);
this.btnSerSwitch.TabIndex = 2;
this.btnSerSwitch.Text = "开启服务器";
this.btnSerSwitch.UseVisualStyleBackColor = true;
this.btnSerSwitch.Click += new System.EventHandler(this.btnSerSwitch_Click);
//
// lblPort
//
this.lblPort.Anchor = System.Windows.Forms.AnchorStyles.None;
this.lblPort.AutoSize = true;
this.lblPort.Font = new System.Drawing.Font("Calibri", 10.8F);
this.lblPort.Location = new System.Drawing.Point(23, 13);
this.lblPort.Name = "lblPort";
this.lblPort.Size = new System.Drawing.Size(90, 23);
this.lblPort.TabIndex = 0;
this.lblPort.Text = "本地端口";
//
// button1
//
this.button1.Location = new System.Drawing.Point(281, 3);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(207, 100);
this.button1.TabIndex = 2;
this.button1.Text = "button1";
this.button1.UseVisualStyleBackColor = true;
//
// richTextBox1
//
this.richTextBox1.Dock = System.Windows.Forms.DockStyle.Fill;
this.richTextBox1.Location = new System.Drawing.Point(559, 3);
this.richTextBox1.Name = "richTextBox1";
this.richTextBox1.Size = new System.Drawing.Size(272, 237);
this.richTextBox1.TabIndex = 1;
this.richTextBox1.Text = "";
//
// menuStrip1
//
this.menuStrip1.ImageScalingSize = new System.Drawing.Size(20, 20);
this.menuStrip1.Location = new System.Drawing.Point(0, 0);
this.menuStrip1.Name = "menuStrip1";
this.menuStrip1.Size = new System.Drawing.Size(1114, 24);
this.menuStrip1.TabIndex = 1;
this.menuStrip1.Text = "menuStrip1";
//
// tmr
//
this.tmr.Enabled = true;
//
// Server
//
this.AutoScaleDimensions = new System.Drawing.SizeF(8F, 15F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
this.ClientSize = new System.Drawing.Size(1114, 510);
this.Controls.Add(this.tlpAll);
this.Controls.Add(this.menuStrip1);
this.MainMenuStrip = this.menuStrip1;
this.Name = "Server";
this.Text = "Server";
this.tlpAll.ResumeLayout(false);
this.tableLayoutPanel1.ResumeLayout(false);
this.tableLayoutPanel1.PerformLayout();
this.ResumeLayout(false);
this.PerformLayout();

}

#endregion

private System.Windows.Forms.TableLayoutPanel tlpAll;
private System.Windows.Forms.MenuStrip menuStrip1;
private System.Windows.Forms.Label lblSwiSta;
private System.Windows.Forms.RichTextBox richTextBox1;
private System.Windows.Forms.TableLayoutPanel tableLayoutPanel1;
private System.Windows.Forms.Button btnSerSwitch;
private System.Windows.Forms.Label lblPort;
private System.Windows.Forms.TextBox txtPort;
private System.Windows.Forms.Button button1;
private System.Windows.Forms.Timer tmr;
}
}


+ 67
- 0
StuMgmServer/StuMgmServer/Server.cs Parādīt failu

@@ -0,0 +1,67 @@
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Threading;
using System.Windows.Forms;

namespace StuMgmServer
{
public partial class Server : Form
{
TcpConn tcpConn = new TcpConn();
Thread tAccept = null;

private delegate void SetTextCallbakc();
public Server()
{
InitializeComponent();
//CheckForIllegalCrossThreadCalls = false;
}

//具体要调用的方面
private void callbakc()
{
richTextBox1.Text += tcpConn.acceptConnection() + " Connected \n";
richTextBox1.Text += tcpConn.acpMsg() + " Disconnected \n";
}

private void btnSerSwitch_Click(object sender, EventArgs e)
{
bool sFlag = tcpConn.SocketExist;
try
{
if (sFlag == true)
tcpConn.CloseServer();
else if (sFlag != true)
{
tcpConn.OpenServer(Convert.ToInt16(txtPort.Text));

//test();
tAccept = new Thread(newTest);
tAccept.Start();

}
}
catch (Exception ep)
{
MessageBox.Show(ep.Message);
}
}
private void newTest()
{
SetTextCallbakc stcb = new SetTextCallbakc(callbakc);
while (true)
{
Invoke(stcb);
//callbakc();
}
}




}
}

+ 126
- 0
StuMgmServer/StuMgmServer/Server.resx Parādīt failu

@@ -0,0 +1,126 @@
<?xml version="1.0" encoding="utf-8"?>
<root>
<!--
Microsoft ResX Schema
Version 2.0
The primary goals of this format is to allow a simple XML format
that is mostly human readable. The generation and parsing of the
various data types are done through the TypeConverter classes
associated with the data types.
Example:
... ado.net/XML headers & schema ...
<resheader name="resmimetype">text/microsoft-resx</resheader>
<resheader name="version">2.0</resheader>
<resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
<resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
<data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
<data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
<data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
<value>[base64 mime encoded serialized .NET Framework object]</value>
</data>
<data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
<value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
<comment>This is a comment</comment>
</data>
There are any number of "resheader" rows that contain simple
name/value pairs.
Each data row contains a name, and value. The row also contains a
type or mimetype. Type corresponds to a .NET class that support
text/value conversion through the TypeConverter architecture.
Classes that don't support this are serialized and stored with the
mimetype set.
The mimetype is used for serialized objects, and tells the
ResXResourceReader how to depersist the object. This is currently not
extensible. For a given mimetype the value must be set accordingly:
Note - application/x-microsoft.net.object.binary.base64 is the format
that the ResXResourceWriter will generate, however the reader can
read any of the formats listed below.
mimetype: application/x-microsoft.net.object.binary.base64
value : The object must be serialized with
: System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
: and then encoded with base64 encoding.
mimetype: application/x-microsoft.net.object.soap.base64
value : The object must be serialized with
: System.Runtime.Serialization.Formatters.Soap.SoapFormatter
: and then encoded with base64 encoding.

mimetype: application/x-microsoft.net.object.bytearray.base64
value : The object must be serialized into a byte array
: using a System.ComponentModel.TypeConverter
: and then encoded with base64 encoding.
-->
<xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
<xsd:element name="root" msdata:IsDataSet="true">
<xsd:complexType>
<xsd:choice maxOccurs="unbounded">
<xsd:element name="metadata">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string" minOccurs="0" />
</xsd:sequence>
<xsd:attribute name="name" use="required" type="xsd:string" />
<xsd:attribute name="type" type="xsd:string" />
<xsd:attribute name="mimetype" type="xsd:string" />
<xsd:attribute ref="xml:space" />
</xsd:complexType>
</xsd:element>
<xsd:element name="assembly">
<xsd:complexType>
<xsd:attribute name="alias" type="xsd:string" />
<xsd:attribute name="name" type="xsd:string" />
</xsd:complexType>
</xsd:element>
<xsd:element name="data">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
<xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
</xsd:sequence>
<xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
<xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
<xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
<xsd:attribute ref="xml:space" />
</xsd:complexType>
</xsd:element>
<xsd:element name="resheader">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
</xsd:sequence>
<xsd:attribute name="name" type="xsd:string" use="required" />
</xsd:complexType>
</xsd:element>
</xsd:choice>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<resheader name="resmimetype">
<value>text/microsoft-resx</value>
</resheader>
<resheader name="version">
<value>2.0</value>
</resheader>
<resheader name="reader">
<value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
</resheader>
<resheader name="writer">
<value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
</resheader>
<metadata name="menuStrip1.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<value>17, 17</value>
</metadata>
<metadata name="tmr.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<value>159, 17</value>
</metadata>
</root>

+ 121
- 0
StuMgmServer/StuMgmServer/StuMgmSer.cs Parādīt failu

@@ -0,0 +1,121 @@
using System;
using System.Collections.Generic;
using System.IO;
//using System.Linq;
using System.Runtime.Serialization.Formatters.Binary;
using System.Text;
//using System.Threading.Tasks;

namespace ConsoleApplication1
{

#region 题目信息
public class CourseInfo
{
public short Id;
public short Pid;
public int Time;
public string Name;
public string Content;
}
#endregion

#region 学生题目信息一览
[Serializable]
public enum CourseStatusEnum
{
undo, // 未开始
doing, // 进行中
waiting, // 等待验收
failed, // 验收失败
preSharing, // 准备分享
pass // 验收通过
}
[Serializable]
public class CourseStatus
{
public short CourseId;
public CourseStatusEnum Status;
}
[Serializable]
public class UserInfo
{
public short JobId;
public string Name;
public List<CourseStatus> CourseStatus;
}
#endregion

#region 学生单题详细信息
public class HistoryInfo
{
DateTime Time;
string Describe;
}
public class DetailInfo
{
public short CourseId;
public short JobId;
List<HistoryInfo> Describes;
}
#endregion



class Server
{
//List<CourseInfo> GetCourseInfo();
//UserInfo GetUserInfo(short jobId);
//DetailInfo GetDetailInfo(short jobId, short courseId);

public byte[] GetUser(short jobId)
{
UserInfo info = new UserInfo();
info.JobId = 111;
info.Name = "aaaa";
info.CourseStatus = new List<CourseStatus>();
CourseStatus aa = new CourseStatus();
aa.CourseId = 222;
aa.Status = CourseStatusEnum.undo; // 做题状态
info.CourseStatus.Add(aa);



MemoryStream ms = new MemoryStream();
BinaryFormatter iFormatter = new BinaryFormatter();
iFormatter.Serialize(ms, info);
byte[] buff = ms.GetBuffer();
return buff;
}

public UserInfo Prase(byte[] bt)
{
MemoryStream ms = new MemoryStream(bt);
BinaryFormatter iFormatter = new BinaryFormatter();
UserInfo obj = (UserInfo)iFormatter.Deserialize(ms);
return obj;
}



}


class StudentInfo
{
//List<CourseInfo> GetCourseInfo();
//UserInfo GetUserInfo(short jobId);
//DetailInfo GetDetailInfo(short jobId, short courseId);
}


class Program
{
//static void Main(string[] args)
//{
// Server s = new Server();
// byte[] buf = s.GetUser(0);
// UserInfo aa = s.Prase(buf);
//}
}
}

+ 86
- 0
StuMgmServer/StuMgmServer/StuMgmServer.csproj Parādīt failu

@@ -0,0 +1,86 @@
<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="12.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
<PropertyGroup>
<Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
<Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
<ProjectGuid>{8FAF69C1-FEBA-49F5-A247-8FF7A5798673}</ProjectGuid>
<OutputType>WinExe</OutputType>
<AppDesignerFolder>Properties</AppDesignerFolder>
<RootNamespace>StuMgmServer</RootNamespace>
<AssemblyName>StuMgmServer</AssemblyName>
<TargetFrameworkVersion>v2.0</TargetFrameworkVersion>
<FileAlignment>512</FileAlignment>
<TargetFrameworkProfile />
</PropertyGroup>
<PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
<PlatformTarget>AnyCPU</PlatformTarget>
<DebugSymbols>true</DebugSymbols>
<DebugType>full</DebugType>
<Optimize>false</Optimize>
<OutputPath>bin\Debug\</OutputPath>
<DefineConstants>DEBUG;TRACE</DefineConstants>
<ErrorReport>prompt</ErrorReport>
<WarningLevel>4</WarningLevel>
</PropertyGroup>
<PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
<PlatformTarget>AnyCPU</PlatformTarget>
<DebugType>pdbonly</DebugType>
<Optimize>true</Optimize>
<OutputPath>bin\Release\</OutputPath>
<DefineConstants>TRACE</DefineConstants>
<ErrorReport>prompt</ErrorReport>
<WarningLevel>4</WarningLevel>
</PropertyGroup>
<ItemGroup>
<Reference Include="System" />
<Reference Include="System.Data" />
<Reference Include="System.Deployment" />
<Reference Include="System.Drawing" />
<Reference Include="System.Windows.Forms" />
<Reference Include="System.Xml" />
</ItemGroup>
<ItemGroup>
<Compile Include="Server.cs">
<SubType>Form</SubType>
</Compile>
<Compile Include="Server.Designer.cs">
<DependentUpon>Server.cs</DependentUpon>
</Compile>
<Compile Include="Program.cs" />
<Compile Include="Properties\AssemblyInfo.cs" />
<Compile Include="StuMgmSer.cs" />
<Compile Include="TcpConn.cs" />
<EmbeddedResource Include="Properties\Resources.resx">
<Generator>ResXFileCodeGenerator</Generator>
<LastGenOutput>Resources.Designer.cs</LastGenOutput>
<SubType>Designer</SubType>
</EmbeddedResource>
<Compile Include="Properties\Resources.Designer.cs">
<AutoGen>True</AutoGen>
<DependentUpon>Resources.resx</DependentUpon>
<DesignTime>True</DesignTime>
</Compile>
<EmbeddedResource Include="Server.resx">
<DependentUpon>Server.cs</DependentUpon>
</EmbeddedResource>
<None Include="app.config" />
<None Include="Properties\Settings.settings">
<Generator>SettingsSingleFileGenerator</Generator>
<LastGenOutput>Settings.Designer.cs</LastGenOutput>
</None>
<Compile Include="Properties\Settings.Designer.cs">
<AutoGen>True</AutoGen>
<DependentUpon>Settings.settings</DependentUpon>
<DesignTimeSharedInput>True</DesignTimeSharedInput>
</Compile>
</ItemGroup>
<Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
<!-- To modify your build process, add your task inside one of the targets below and uncomment it.
Other similar extension points exist, see Microsoft.Common.targets.
<Target Name="BeforeBuild">
</Target>
<Target Name="AfterBuild">
</Target>
-->
</Project>

+ 102
- 0
StuMgmServer/StuMgmServer/TcpConn.cs Parādīt failu

@@ -0,0 +1,102 @@
using System;
using System.Collections.Generic;
using System.Net;
using System.Net.Sockets;
using System.Threading;
using System.Windows.Forms;

namespace StuMgmServer
{
class TcpConn
{
private IPEndPoint IPP = null;
private Socket socket = null;
private Socket socketClient = null;
//private Thread tAccept = null;

#region 连接状态字段
private bool my_connect = false;
public bool Connect
{
get { return my_connect; }
set { my_connect = value; }
}
#endregion

private bool my_SocketExist = false;
/// <summary>
/// 判断服务器开关
/// </summary>
public bool SocketExist
{
get { return my_SocketExist; }
private set { my_SocketExist = value; }
}

#region 开启服务器
public void OpenServer(int port)
{
IPP = new IPEndPoint(IPAddress.Parse("127.0.0.1"), port);
socket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);
socket.Bind(IPP);
socket.Listen(0);
SocketExist = true;
}
#endregion

#region 关闭服务器
public void CloseServer()
{
if (socketClient != null)
socketClient.Close();
if (socket != null)
socket.Close();
SocketExist = false;
}
#endregion

#region 接收客户端连接
public EndPoint acceptConnection()
{
try
{
socketClient = socket.Accept(); // 阻塞等待客户端连接
return socketClient.RemoteEndPoint;
}
catch (Exception)
{
return null;
}
}
#endregion

#region 接收数据
public string acpMsg()
{
byte[] arrDataRecv = new byte[1024]; // 定义接收数组
string reEdPoint = socketClient.RemoteEndPoint.ToString();
try
{
int len = socketClient.Receive(arrDataRecv);
List<byte> listDataRecv = new List<byte> { }; // 定义截取列表
return reEdPoint + " " + len.ToString();
}
catch // 客户端断开连接
{
return reEdPoint;
}
finally
{
if (socketClient != null)
socketClient.Close();
}
}
#endregion






}
}

+ 3
- 0
StuMgmServer/StuMgmServer/app.config Parādīt failu

@@ -0,0 +1,3 @@
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<startup><supportedRuntime version="v2.0.50727"/></startup></configuration>

Rakstīt Priekšskatītījums
Notiek ielāde…
Atcelt
Saglabāt