|
- /**
- ******************************************************************************
- * @file stm32f4xx_hal_flash.h
- * @author MCD Application Team
- * @brief Header file of FLASH HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2017 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- /* Define to prevent recursive inclusion -------------------------------------*/
- #ifndef __STM32F4xx_HAL_FLASH_H
- #define __STM32F4xx_HAL_FLASH_H
-
- #ifdef __cplusplus
- extern "C" {
- #endif
-
- /* Includes ------------------------------------------------------------------*/
- #include "stm32f4xx_hal_def.h"
-
- /** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
- /** @addtogroup FLASH
- * @{
- */
-
- /* Exported types ------------------------------------------------------------*/
- /** @defgroup FLASH_Exported_Types FLASH Exported Types
- * @{
- */
-
- /**
- * @brief FLASH Procedure structure definition
- */
- typedef enum
- {
- FLASH_PROC_NONE = 0U,
- FLASH_PROC_SECTERASE,
- FLASH_PROC_MASSERASE,
- FLASH_PROC_PROGRAM
- } FLASH_ProcedureTypeDef;
-
- /**
- * @brief FLASH handle Structure definition
- */
- typedef struct
- {
- __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
-
- __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
-
- __IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/
-
- __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
-
- __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
-
- __IO uint32_t Address; /*Internal variable to save address selected for program*/
-
- HAL_LockTypeDef Lock; /* FLASH locking object */
-
- __IO uint32_t ErrorCode; /* FLASH error code */
-
- }FLASH_ProcessTypeDef;
-
- /**
- * @}
- */
-
- /* Exported constants --------------------------------------------------------*/
- /** @defgroup FLASH_Exported_Constants FLASH Exported Constants
- * @{
- */
- /** @defgroup FLASH_Error_Code FLASH Error Code
- * @brief FLASH Error Code
- * @{
- */
- #define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */
- #define HAL_FLASH_ERROR_RD 0x00000001U /*!< Read Protection error */
- #define HAL_FLASH_ERROR_PGS 0x00000002U /*!< Programming Sequence error */
- #define HAL_FLASH_ERROR_PGP 0x00000004U /*!< Programming Parallelism error */
- #define HAL_FLASH_ERROR_PGA 0x00000008U /*!< Programming Alignment error */
- #define HAL_FLASH_ERROR_WRP 0x00000010U /*!< Write protection error */
- #define HAL_FLASH_ERROR_OPERATION 0x00000020U /*!< Operation Error */
- /**
- * @}
- */
-
- /** @defgroup FLASH_Type_Program FLASH Type Program
- * @{
- */
- #define FLASH_TYPEPROGRAM_BYTE 0x00000000U /*!< Program byte (8-bit) at a specified address */
- #define FLASH_TYPEPROGRAM_HALFWORD 0x00000001U /*!< Program a half-word (16-bit) at a specified address */
- #define FLASH_TYPEPROGRAM_WORD 0x00000002U /*!< Program a word (32-bit) at a specified address */
- #define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00000003U /*!< Program a double word (64-bit) at a specified address */
- /**
- * @}
- */
-
- /** @defgroup FLASH_Flag_definition FLASH Flag definition
- * @brief Flag definition
- * @{
- */
- #define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
- #define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
- #define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
- #define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
- #define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
- #define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
- #if defined(FLASH_SR_RDERR)
- #define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< Read Protection error flag (PCROP) */
- #endif /* FLASH_SR_RDERR */
- #define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
- /**
- * @}
- */
-
- /** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
- * @brief FLASH Interrupt definition
- * @{
- */
- #define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
- #define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */
- /**
- * @}
- */
-
- /** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
- * @{
- */
- #define FLASH_PSIZE_BYTE 0x00000000U
- #define FLASH_PSIZE_HALF_WORD 0x00000100U
- #define FLASH_PSIZE_WORD 0x00000200U
- #define FLASH_PSIZE_DOUBLE_WORD 0x00000300U
- #define CR_PSIZE_MASK 0xFFFFFCFFU
- /**
- * @}
- */
-
- /** @defgroup FLASH_Keys FLASH Keys
- * @{
- */
- #define RDP_KEY ((uint16_t)0x00A5)
- #define FLASH_KEY1 0x45670123U
- #define FLASH_KEY2 0xCDEF89ABU
- #define FLASH_OPT_KEY1 0x08192A3BU
- #define FLASH_OPT_KEY2 0x4C5D6E7FU
- /**
- * @}
- */
-
- /**
- * @}
- */
-
- /* Exported macro ------------------------------------------------------------*/
- /** @defgroup FLASH_Exported_Macros FLASH Exported Macros
- * @{
- */
- /**
- * @brief Set the FLASH Latency.
- * @param __LATENCY__ FLASH Latency
- * The value of this parameter depend on device used within the same series
- * @retval none
- */
- #define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
-
- /**
- * @brief Get the FLASH Latency.
- * @retval FLASH Latency
- * The value of this parameter depend on device used within the same series
- */
- #define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
-
- /**
- * @brief Enable the FLASH prefetch buffer.
- * @retval none
- */
- #define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
-
- /**
- * @brief Disable the FLASH prefetch buffer.
- * @retval none
- */
- #define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
-
- /**
- * @brief Enable the FLASH instruction cache.
- * @retval none
- */
- #define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
-
- /**
- * @brief Disable the FLASH instruction cache.
- * @retval none
- */
- #define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
-
- /**
- * @brief Enable the FLASH data cache.
- * @retval none
- */
- #define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
-
- /**
- * @brief Disable the FLASH data cache.
- * @retval none
- */
- #define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
-
- /**
- * @brief Resets the FLASH instruction Cache.
- * @note This function must be used only when the Instruction Cache is disabled.
- * @retval None
- */
- #define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \
- FLASH->ACR &= ~FLASH_ACR_ICRST; \
- }while(0U)
-
- /**
- * @brief Resets the FLASH data Cache.
- * @note This function must be used only when the data Cache is disabled.
- * @retval None
- */
- #define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \
- FLASH->ACR &= ~FLASH_ACR_DCRST; \
- }while(0U)
- /**
- * @brief Enable the specified FLASH interrupt.
- * @param __INTERRUPT__ FLASH interrupt
- * This parameter can be any combination of the following values:
- * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
- * @arg FLASH_IT_ERR: Error Interrupt
- * @retval none
- */
- #define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
-
- /**
- * @brief Disable the specified FLASH interrupt.
- * @param __INTERRUPT__ FLASH interrupt
- * This parameter can be any combination of the following values:
- * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
- * @arg FLASH_IT_ERR: Error Interrupt
- * @retval none
- */
- #define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
-
- /**
- * @brief Get the specified FLASH flag status.
- * @param __FLAG__ specifies the FLASH flags to check.
- * This parameter can be any combination of the following values:
- * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
- * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
- * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
- * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
- * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
- * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
- * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
- * @arg FLASH_FLAG_BSY : FLASH Busy flag
- * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices
- * @retval The new state of __FLAG__ (SET or RESET).
- */
- #define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
-
- /**
- * @brief Clear the specified FLASH flags.
- * @param __FLAG__ specifies the FLASH flags to clear.
- * This parameter can be any combination of the following values:
- * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
- * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
- * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
- * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
- * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
- * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
- * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
- * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices
- * @retval none
- */
- #define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
- /**
- * @}
- */
-
- /* Include FLASH HAL Extension module */
- #include "stm32f4xx_hal_flash_ex.h"
- #include "stm32f4xx_hal_flash_ramfunc.h"
-
- /* Exported functions --------------------------------------------------------*/
- /** @addtogroup FLASH_Exported_Functions
- * @{
- */
- /** @addtogroup FLASH_Exported_Functions_Group1
- * @{
- */
- /* Program operation functions ***********************************************/
- HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
- HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
- /* FLASH IRQ handler method */
- void HAL_FLASH_IRQHandler(void);
- /* Callbacks in non blocking modes */
- void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
- void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
- /**
- * @}
- */
-
- /** @addtogroup FLASH_Exported_Functions_Group2
- * @{
- */
- /* Peripheral Control functions **********************************************/
- HAL_StatusTypeDef HAL_FLASH_Unlock(void);
- HAL_StatusTypeDef HAL_FLASH_Lock(void);
- HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
- HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
- /* Option bytes control */
- HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
- /**
- * @}
- */
-
- /** @addtogroup FLASH_Exported_Functions_Group3
- * @{
- */
- /* Peripheral State functions ************************************************/
- uint32_t HAL_FLASH_GetError(void);
- HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
- /**
- * @}
- */
-
- /**
- * @}
- */
- /* Private types -------------------------------------------------------------*/
- /* Private variables ---------------------------------------------------------*/
- /** @defgroup FLASH_Private_Variables FLASH Private Variables
- * @{
- */
-
- /**
- * @}
- */
- /* Private constants ---------------------------------------------------------*/
- /** @defgroup FLASH_Private_Constants FLASH Private Constants
- * @{
- */
-
- /**
- * @brief ACR register byte 0 (Bits[7:0]) base address
- */
- #define ACR_BYTE0_ADDRESS 0x40023C00U
- /**
- * @brief OPTCR register byte 0 (Bits[7:0]) base address
- */
- #define OPTCR_BYTE0_ADDRESS 0x40023C14U
- /**
- * @brief OPTCR register byte 1 (Bits[15:8]) base address
- */
- #define OPTCR_BYTE1_ADDRESS 0x40023C15U
- /**
- * @brief OPTCR register byte 2 (Bits[23:16]) base address
- */
- #define OPTCR_BYTE2_ADDRESS 0x40023C16U
- /**
- * @brief OPTCR register byte 3 (Bits[31:24]) base address
- */
- #define OPTCR_BYTE3_ADDRESS 0x40023C17U
-
- /**
- * @}
- */
-
- /* Private macros ------------------------------------------------------------*/
- /** @defgroup FLASH_Private_Macros FLASH Private Macros
- * @{
- */
-
- /** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
- * @{
- */
- #define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
- ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
- ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
- ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
- /**
- * @}
- */
-
- /**
- * @}
- */
-
- /* Private functions ---------------------------------------------------------*/
- /** @defgroup FLASH_Private_Functions FLASH Private Functions
- * @{
- */
-
- /**
- * @}
- */
-
- /**
- * @}
- */
-
- /**
- * @}
- */
-
- #ifdef __cplusplus
- }
- #endif
-
- #endif /* __STM32F4xx_HAL_FLASH_H */
-
- /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|